GPB70/70D (6.5MW Class)

gpb70d_package

Ideal for reliable on-site base load power generation requiring from 5.5 MW to 6.5 MW for co-generation applications.
The GPB70/70D is based on Kawasaki's proven M7A heavy duty industrial gas turbine with over 15 years of commercial experience and proven reliability.  At 6.7 MW (ISO), it is ideal for cogeneration applications in offshore oil platforms, industrial process plant applications, hospitals, universities / colleges, prisons, district energy systems, life-science and bio-science facilities, and other facilities with large thermal and electrical loads.  The Kawasaki Industrial Gas Turbine Generator Unit provides the benefit of a large thermal capability to provide a co-generation system efficiency of 80% and a long service life of 32,000 EOH between overhauls.

gpb70d_engine

A Closer Look

 

The GPB70D is suited for geographic areas requiring emissions control, with NOx emissions of 25 ppm (O2=15%) and CO emissions of 50 ppm (O2=15%) from 70-100% load, using Kawasaki's multiple nozzle DLE (Dry Low Emissions) fuel injection combustion system.

More GPB Series Gas Turbines
Download More Information

GPB70 Family Performance - IP Units(Switch To SI Units)
Inlet Air Temp. Electric Output Thermal Output Fuel Input CHP Efficiency HRSG Steam Output Exhaust Temp. Exhaust Flow
°F kWe kWt kWt % lb/hr °F lb/s
GPB70 CHP Performance
32 7,184 11,248 23,777 77.5 36,800 956 61.1
59 6,639 11,046 22,109 80.0 36,140 965 58.7
86 5,769 10,837 20,023 82.9 35,480 984 55.0
104 5,122 10,709 18,631 85.0 35,040 1,003 52.3
GPB70D CHP Performance
32 7,120 11,113 23,603 77.2 36,380 951 61.1
59 6,576 10,911 21,945 79.7 35,720 960 58.7
86 5,711 10,736 19,877 82.7 35,150 979 55.0
104 5,068 10,642 18,498 84.9 34,840 998 52.3

Units Weights and Dimensions GPB70/70D - IP Units (Switch To SI Units)
Dimension (L,W,H) Weight
inches lbs
453 x 110 x 142 119,100


Fuel:
Gas Fuel, Liquid Fuel, Dual Fuel

Note:

Performance based on:

4 inch H2O intake / 10 inch H2O exhaust pressure losses
Sea level elevation
120 psig (8.3 barG) Steam Pressure
176 oF (80 oC) Feed-water Temperature
Natural Gas Pressure of 300 psig (20.7 barG)

  • Contact Kawasaki Engineering for site-specific performance
  • Performance is not guaranteed

Standard Equipment Special Features
  • M7A-02 (GPB70) / M7A-02D (GPB70D) heavy duty industrial single shaft gas turbine engine
  • Reduction gearbox with main lube oil pump and turning motor
  • VFD Motor starting system
  • Indoor enclosure, sound attenuated to 85 dBA, with lighting, ventilation, chain block and rail for maintenance
  • 4.16 kV generator, air cooled, open drip proof type, with sleeve bearings and brushless PMG exciter
  • Heavy-duty I beam steel base-frame for the turbine engine, primed and painted
  • Lube oil system includes gear driven main lube oil pump, duplex filters, air cooled lube oil heat exchanger, motor driven vent demister, tank integrated into the base-frame with oil heater, lube oil filter and lube oil cooler
  • Fuel gas system with shut-off block and bleed valves
  • State-of-the-art PLC control
  • Inlet filter house with weather louvers, and 2 stage static depth loading box type filter system using water resistant synthetic media
  • Enclosure designed for 85 dBa noise attenuation includes fan forced ventilation system with CO2 dampers and maintenance access doors
  • Engine Removal I beam with rolling trolley and chain lift
  • Battery system ( lead acid) with battery charger for coast down lube oil pumps and jacking motor
  • Exhaust flex joint, and exhaust ducting
  • Engine compressor water wash cart
  • Proven Heavy Duty Industrial Design
  • High Efficiency
  • Option: Fire and gas detection with CO2 suppression system
  • Option: Dual fuel system for operation on both gas and liquid fuels
  • Option: Generator Voltages from 4.16 kV to 13.8 kV
< Go to Top >