  |
Ideal for power generation ranging from 2 to 3 Mw's in areas that do not require reduced emissions to meet regulations. Also ideal for use in Cogeneration CHP applications.
The GPB30 offers electrical efficiency of 30% and an overall Cogeneration thermal efficiency of 80%. It is ideal for use in areas that do not require emssions controls and is well suited for use in: Hotels, Shopping malls, high rise apartment buildings/ offices, industrial process plant applications, hospitals, universities, office complexes with district heating and cooling loads, pharmaceuticals, LNG Terminals, and other facilities with significant thermal and electrical loads.
The GPB30, as with all of our GT products, is a skid mounted packaged power plant - allowing for quick installation and comissioning at your site. |
A Closer Look
The GPB30 is ideal for use in cogeneration applications and: industrial process plants, Hospitals, Universities, shopping malls and office complexes incorporating district heating and cooling systems, high rise apartment / office buildings, pharmaceuticals, LNG Terminals, and other facilities with significant thermal and electrical loads.
- Offers electrical efficiency of 35% and an overall Cogeneration efficiency of 80%
- Combined-cycle power plant with the GPB30 and a steam turbine will realize electrical efficiency of over 48%
- Design assures better RAM (reliability, availability, maintainability) and greater durability with 30,000 HRS TBO (Time Between Overhauls)
- Reduced NOx emissions of under 23 ppm at O2=15%
- Split case design allows for ease of inspection and maintenance on site, reducing costly downtime
- Robust design handles rapid loads swings easily with little voltage drop
|
More GPB Series Gas Turbines
Download More Information
|
| kW |
kJ/kW-hr |
°F |
kg/hr |
lbs /hr |
% |
| 2,850 |
14,570 |
973 |
126,720 |
22,200 |
76.8 |
| kWe |
kJ/kW-hr |
°C |
kg/hr |
kg/hr |
% |
| 2,850 |
15,340 |
523 |
57,600 |
10,100 |
76.8 |
| inches |
lbs |
| 234 L x 94W x 92H |
48,400 |
| m |
kg |
| 6.0 x 2.4 W x 2.8H |
22,000 |
Natural Gas fuel , NOx Reduction: Dry Low Emission, NOx: 23 ppm, CO: 25 ppm, VOC: 2.0 ppm
Performance shown here-in is based on 4 inch and 10 inch H2O intake/exhaust pressure losses
DLE is available from 50–100% load
Sea level site
Required gas pressure: 206 psig
Standard Equipment
- Based on our heavy duty M1A-13A gas turbine engine with a single combustor
- Reduction gearbox with gear driven main lube oil pump and turning motor
- VFD \" soft start\" motor starting system
- Indoor enclosure, sound attenuated to 85 dBA, with maintenance access doors, lighting, ventilation, chain block and rail for maintenance
- 4160 V generator, open drip proof type, air cooled, with brushless PMG exciter
- Heavy-duty I beam steel base-frame with integral lube oil tank for the turbine engine, primed and painted
- Lube oil system includes gear driven main lube oil pump, duplex filters, air cooled lube oil heat exchanger, vent demister, tank integrated into the base-frame with oil heater, lube oil filter and lube oil cooler
- Fuel gas system with block and bleed valves
- Fire and gas detection with CO2 suppression system
- State-of-the-art PLC control - Allen Bradley PLC
- Inlet filter house with weather louvers, and 2 stage static depth loading box type filter system using water resistant synthetic media - Viledon filters
- Enclosure designed for 85 dBa noise attenuation includes fan forced ventilation system with CO2 dampers and maintenance access doors
- Engine Removal I beam with rolling trolley and chain lift
- Lead acid battery system with battery charger for coast down lube oil pumps and jacking motor
- Exhaust expansion flex joint and exhaust ducting
- Engine compressor water wash cart -
|
Special Features
- Proven Heavy Duty Industrial Design
- High Efficiency
- Option: Fuel gas booster compressor . KGTA offers both reciprocating and screw type booster compressors
- Option: Dual fuel system for operation on both gas and liquid fuels
- Option: Inlet air chilling - KGTA offers evaporative cooling, and water chiller system to reduce inlet air timep. to produce more power in hot environments
- Option: Black start using diesel gen sets - KGTA will quote you a reliable black start system for your site
- Option: Self cleaning air inlet pulse type filters
- Option - high pressure air starting system for black start capability
- Option: Pre-wired \"extended skid\" for mounting major electrical components such as: 52 G output brekaer, VFD motor start, MCC\'s, battery system, gas turbine and generator control panels, fire and gas detection systems
|
